#5, Floor V, Srinath Commercial
Complex, SD Road, Secunderabad 500 003, A.P., INDIA.| Lime Grit | Fluid Conditioner |
Cooling towers are one of the most common equipment in all industries. Generally cooling tower fans are designed for maximum process load and the worst ambient conditions. These two conditions may not occur all the time. Generally, majority of the time either process load may be less or the ambient conditions may be favourable. Under these conditions, an excess capacity of the fan is available. A control system which optimizes the capacity of cooling tower fans or minimizes the operating hours of the cooling tower fan gives substantial energy savings.
Our Energy Saving System for Cooling Towers provides a temperature control by continuously sensing the cold well temperature. Based on the signal from the sensor, the controller increases / decreases the speed of the cooling tower fans. The fans run at low speed during night time & also at lower process loads. This reduces the power consumption of cooling tower fans by 50%.
The advantages of our system are:
The power drawn by the motor can be recorded by using an energy meter and hence the POWER SAVED can be quantitatively assessed & PROVED.
The return on investment by virtue of energy saving in cooling tower is within 9 months to a year.
Download printer-friendly leaflet
| Lime Grit | Fluid Conditioner |